This guide walks you through how to reset your X6 smart watch back to factory settings safely and effectively. Whether you’re troubleshooting issues or preparing to sell your device, we’ll show you the right steps to restore it to its original state.
Key Takeaways
- Factory reset erases all data: This process removes personal settings, apps, and health data, returning the watch to its original state.
- Two reset methods available: You can reset via the watch menu or using the companion app on your smartphone.
- Backup important data first: Always sync and save your fitness or health data before resetting to avoid permanent loss.
- Ensure full battery charge: A low battery during reset can cause errors or incomplete restoration.
- Reset fixes common glitches: Freezing, syncing issues, or unresponsive screens are often resolved with a factory reset.
- Re-pair after reset: You’ll need to reconnect the watch to your phone and reconfigure settings post-reset.
- Contact support if issues persist: If the reset fails, reach out to X6 customer support for technical assistance.
How to Reset X6 Smart Watch Back to Factory Settings
If your X6 smart watch is acting up—freezing, lagging, or refusing to sync with your phone—you might be wondering how to get it back to normal. The best solution? A factory reset. This process wipes all your personal data and settings, returning the watch to the way it was when you first unboxed it.
Don’t worry—it’s easier than it sounds. In this guide, we’ll walk you through how to reset your X6 smart watch back to factory settings using two reliable methods: directly on the watch or through the companion app. We’ll also share tips to avoid common pitfalls and troubleshoot any issues that might come up.
Whether you’re troubleshooting a stubborn bug, preparing to sell your watch, or just want a fresh start, this step-by-step guide has you covered. Let’s get started!
Why Reset Your X6 Smart Watch?
Visual guide about How to Reset X6 Smart Watch Back to Factory Settings
Image source: img.gadgethacks.com
Before diving into the steps, it’s helpful to understand why a factory reset might be necessary. Over time, smart watches like the X6 can accumulate software glitches, corrupted settings, or outdated app data that slow down performance. Here are the most common reasons users reset their X6 smart watch:
- Performance issues: If your watch is freezing, crashing, or responding slowly to touch, a reset can clear out the clutter and restore smooth operation.
- Syncing problems: When your watch won’t connect to your phone or stops syncing health data, a factory reset often resolves the issue.
- Forgotten password or lock screen: If you’ve set a PIN or pattern and can’t remember it, a reset is the only way to regain access.
- Preparing to sell or gift: To protect your privacy, always reset the watch before passing it on to someone else.
- Software update failures: Failed updates can leave the system in an unstable state—resetting gives you a clean slate to try again.
A factory reset is a powerful tool, but it’s not something to do lightly. It erases everything—your step count, heart rate history, custom watch faces, and app settings. That’s why it’s crucial to back up your data first.
Before You Reset: Important Preparations
Taking a few minutes to prepare can save you a lot of frustration later. Here’s what you should do before resetting your X6 smart watch:
1. Charge Your Watch Fully
A low battery during a reset can interrupt the process and potentially damage the system. Plug in your X6 smart watch and let it charge to at least 80–100%. This ensures the reset completes without power-related issues.
2. Sync and Backup Your Data
Your X6 watch likely stores valuable health and fitness data—steps, sleep patterns, heart rate logs, and more. Before resetting, make sure this data is synced to the companion app (usually called “VeryFit” or “Da Fit” depending on your model).
To sync:
- Open the app on your phone.
- Tap the device icon or “My Device.”
- Look for a “Sync” button and tap it.
- Wait for the sync to complete—this may take a minute or two.
Once synced, your data is safely stored in the cloud (if supported) or on your phone. You can re-download it after the reset.
3. Remove the Watch from Your Phone’s Bluetooth List
After a reset, your phone may still “remember” the old connection, causing pairing issues. To avoid this:
- Go to your phone’s Bluetooth settings.
- Find your X6 smart watch in the list of paired devices.
- Tap the “i” icon or “Forget This Device.”
This clears the old pairing and ensures a fresh connection after the reset.
4. Note Down Custom Settings
If you’ve customized your watch—like setting a specific watch face, enabling notifications for certain apps, or adjusting workout modes—jot these down. You’ll need to reconfigure them manually after the reset.
Method 1: Reset X6 Smart Watch Using the On-Device Menu
The most straightforward way to reset your X6 smart watch is directly from the watch itself. This method works even if your phone isn’t nearby or the app isn’t functioning.
Step 1: Access the Main Menu
Wake up your X6 smart watch by tapping the screen or pressing the side button. Swipe left or right to navigate to the main menu. Look for an icon that resembles a gear or says “Settings.”
Step 2: Navigate to System or Reset Options
In the Settings menu, scroll down until you find an option labeled “System,” “Device,” or “Reset.” The exact wording may vary slightly depending on your firmware version.
Step 3: Select “Factory Reset” or “Restore to Default”
Tap on the reset option. You’ll likely see a warning message explaining that all data will be erased. Read it carefully, then confirm by tapping “OK,” “Reset,” or “Yes.”
Step 4: Wait for the Reset to Complete
The watch will restart automatically. This process usually takes 1–3 minutes. You’ll see a loading screen or the X6 logo appear. Do not turn off the watch or remove it from your wrist during this time.
Step 5: Set Up Your Watch Again
Once the reset is complete, the watch will return to its initial setup screen—just like when you first bought it. Follow the on-screen prompts to select your language, connect to Wi-Fi (if supported), and pair it with your phone.
Method 2: Reset X6 Smart Watch Using the Companion App
If you prefer using your smartphone or the on-device menu isn’t working, you can reset your X6 smart watch through the companion app. This method is especially useful if the watch is unresponsive or you can’t access the settings menu.
Step 1: Open the Companion App
Launch the app you use to manage your X6 watch—commonly “VeryFit,” “Da Fit,” or “Amazfit” (depending on the region and model). Make sure your phone is connected to the internet.
Step 2: Connect to Your Watch
Ensure your X6 smart watch is within Bluetooth range and powered on. The app should automatically detect and connect to it. If not, tap “Add Device” or “Scan” to reconnect.
Step 3: Go to Device Settings
Once connected, tap on your watch’s name or the device icon at the top of the screen. This opens the device management panel.
Step 4: Find the Reset Option
Scroll down to find an option like “Factory Reset,” “Restore,” or “Reset Device.” It’s usually located under “Advanced Settings” or “System.”
Step 5: Confirm the Reset
Tap the reset button. The app will ask for confirmation—read the warning message and tap “OK” or “Reset” to proceed. The app will send a command to the watch, which will then begin the reset process.
Step 6: Wait and Reconnect
Your watch will restart automatically. Once it’s back on, you’ll need to re-pair it with your phone using the app. Follow the setup prompts to restore your preferences.
Troubleshooting Common Reset Issues
Even with careful preparation, things can sometimes go wrong. Here are solutions to the most common problems users face when resetting their X6 smart watch:
Issue 1: Watch Won’t Reset or Freezes During Process
If your watch gets stuck on the loading screen or won’t respond to the reset command:
- Force restart: Press and hold the side button for 10–15 seconds until the screen turns off and restarts.
- Try the app method: If the on-device reset fails, use the companion app instead.
- Check for updates: Outdated firmware can cause instability. Update the app and watch software before resetting.
Issue 2: Watch Doesn’t Reconnect After Reset
After a reset, your phone may not recognize the watch:
- Restart both devices: Turn off your phone and watch, then turn them back on.
- Clear Bluetooth cache: On Android, go to Settings > Apps > Bluetooth > Storage > Clear Cache. On iPhone, toggle Bluetooth off and on.
- Reinstall the app: Uninstall and reinstall the companion app to refresh the connection.
Issue 3: Data Not Synced Before Reset
If you forgot to sync your data and already reset the watch:
- Check app history: Some apps store recent data locally. Open the app and look for “History” or “Reports.”
- Contact support: Reach out to X6 customer service—they may be able to recover data if it was synced recently.
Issue 4: Reset Option Is Missing or Grayed Out
If you can’t find the reset option or it’s disabled:
- Update the app: Older versions may not support reset functionality.
- Check watch model: Some X6 variants have different menu layouts. Refer to your user manual.
- Try a different method: Switch from the app to the on-device menu or vice versa.
After the Reset: What to Do Next
Once your X6 smart watch has been successfully reset, it’s time to set it up like new. Here’s how to get the most out of your fresh start:
1. Reconnect to Your Phone
Open the companion app and follow the pairing instructions. Make sure Bluetooth is enabled and your phone is nearby.
2. Restore Your Preferences
Reconfigure your favorite settings:
- Choose a watch face.
- Enable notifications for calls, messages, and apps.
- Set up health goals and workout modes.
3. Sync Your Data
If you backed up your health data, it should automatically sync once the watch is connected. Check the app to confirm your history is restored.
4. Test Key Features
Make sure everything works:
- Check the heart rate monitor.
- Start a workout session.
- Receive a call or message notification.
If all functions are working, your reset was successful!
Tips to Avoid Future Issues
To keep your X6 smart watch running smoothly and reduce the need for future resets:
- Update regularly: Install firmware and app updates as soon as they’re available.
- Avoid overloading storage: Don’t install too many apps or watch faces.
- Restart weekly: A simple restart can clear temporary glitches.
- Keep it clean: Wipe the screen and sensors regularly to prevent malfunctions.
- Use original charger: Cheap chargers can damage the battery and affect performance.
Conclusion
Resetting your X6 smart watch back to factory settings is a simple yet powerful way to fix performance issues, prepare for resale, or start fresh. Whether you use the on-device menu or the companion app, the process is straightforward when you follow the right steps.
Remember to back up your data, charge your watch, and re-pair it properly after the reset. And if you run into trouble, don’t hesitate to try the troubleshooting tips or contact X6 support.
With your watch restored to its original state, you can enjoy reliable performance, accurate health tracking, and a seamless connection to your digital life. Now go enjoy your refreshed X6 smart watch!