This guide walks you through how to reset smart watch U8 using both manual and app-based methods. Whether you’re troubleshooting issues or preparing to sell your device, you’ll find clear, reliable steps to restore it to factory settings.
Key Takeaways
- Understand the two main reset methods: You can reset your smart watch U8 either directly on the device or via a connected smartphone app.
- Back up important data first: Resetting erases all personal data, so sync your health stats, contacts, and settings beforehand.
- Ensure sufficient battery life: Always charge your watch to at least 50% before starting the reset process to avoid interruptions.
- Know when to reset: Use a reset for persistent glitches, pairing problems, or before transferring ownership.
- Follow on-screen prompts carefully: The reset process may vary slightly depending on firmware version—pay attention to confirmations and warnings.
- Troubleshoot common issues: If the reset fails, try restarting the device, re-pairing with the app, or performing a hard reset.
- Reconfigure after reset: Once reset, you’ll need to reconnect to Wi-Fi, pair with your phone, and customize settings again.
Introduction: Why Reset Your Smart Watch U8?
Smart watches like the U8 have become essential tools for tracking fitness, managing notifications, and staying connected on the go. But like any tech device, they can sometimes act up—freezing, lagging, or refusing to sync with your phone. When basic troubleshooting doesn’t work, a factory reset is often the best solution. Resetting your smart watch U8 restores it to its original settings, clearing out corrupted data, fixing software glitches, and giving you a fresh start.
In this comprehensive guide, you’ll learn how to reset smart watch U8 safely and effectively. Whether you’re dealing with a frozen screen, connection issues, or simply want to wipe personal data before selling or gifting the device, we’ve got you covered. We’ll walk you through two reliable methods—resetting directly on the watch and using the companion app—plus essential tips to avoid common pitfalls. By the end, you’ll feel confident performing a reset without losing important information or damaging your device.
What Is a Factory Reset?
A factory reset, also known as a hard reset, returns your smart watch U8 to the state it was in when you first unboxed it. This means all user data—including apps, settings, health records, paired devices, and custom watch faces—will be permanently deleted. The operating system remains intact, but everything you’ve added or changed since purchase gets wiped clean.
Visual guide about How to Reset Smart Watch U8
Image source: chinesesmartwatches.com
Think of it like restoring a computer to its original factory image. It’s a powerful tool for resolving persistent technical issues, but it should be used as a last resort after simpler fixes (like restarting or updating software) have failed. A reset can solve problems such as:
- The watch freezing or becoming unresponsive
- Bluetooth pairing failures with your smartphone
- Apps crashing or not opening
- Battery draining unusually fast
- Incorrect time, date, or location settings
It’s also the recommended step before selling, donating, or giving away your smart watch U8 to protect your privacy.
When Should You Reset Your Smart Watch U8?
Not every hiccup requires a full reset. Try these simpler fixes first:
- Restart the watch by holding the power button for 10–15 seconds.
- Ensure the device is updated to the latest firmware.
- Toggle Bluetooth off and on on both the watch and phone.
- Clear the cache in the companion app (if supported).
However, if you’re experiencing any of the following, a reset is likely necessary:
- The watch won’t turn on or respond to touch
- It repeatedly crashes or restarts on its own
- You can’t pair it with any smartphone
- Settings won’t save or keep changing back
- You’re preparing to sell or transfer ownership
Resetting is especially useful if you’ve installed third-party apps that may have caused instability. It’s also a good idea if you’ve forgotten your PIN or password and can’t access the device.
Preparation: What to Do Before Resetting
Before you begin the reset process, take a few minutes to prepare. This ensures you don’t lose important data and that the reset goes smoothly.
1. Charge Your Watch
Always make sure your smart watch U8 has at least 50% battery before starting. A reset can take several minutes, and if the device powers off mid-process, it could lead to software corruption or a bricked device. Plug it into the charger and wait until the battery icon shows a healthy charge.
2. Sync and Back Up Data
Open the companion app (usually called “VeryFit,” “Da Fit,” or similar, depending on your model) on your smartphone and sync your watch. This uploads your latest health data—steps, heart rate, sleep patterns, workouts—to the cloud or your phone. While the watch itself won’t retain this data after a reset, having a backup means you can restore it later when you set up the device again.
If your app allows, export or save screenshots of important stats, especially if you’re tracking long-term fitness goals.
3. Note Down Custom Settings
Take a photo or write down any custom settings you’ve configured, such as:
- Preferred watch face
- Notification preferences (which apps send alerts)
- Do Not Disturb schedule
- Heart rate monitoring frequency
- Alarm times
You’ll need to reconfigure these after the reset, so having a reference saves time.
4. Unpair from Other Devices
If your watch is paired with multiple devices (like a tablet or secondary phone), disconnect them through the app or Bluetooth settings. This prevents confusion during the re-pairing process later.
5. Ensure Stable Internet Connection
If you plan to use the app-based reset method, make sure your smartphone has a stable Wi-Fi or cellular connection. Some reset functions require communication between the app and the watch.
Method 1: Reset Smart Watch U8 Directly on the Device
This is the most common and straightforward way to reset your smart watch U8. It doesn’t require a smartphone or app and works even if the watch isn’t paired.
Step 1: Access the Settings Menu
Wake up your smart watch U8 by tapping the screen or pressing the side button. Swipe left or right to navigate to the main menu. Look for an icon labeled “Settings”—it usually looks like a gear or cogwheel. Tap to open it.
Step 2: Navigate to System or Reset Options
Scroll down through the settings menu using your finger. Depending on your firmware version, you may see options like:
- “System”
- “General”
- “Reset”
- “Restore”
- “Factory Reset”
Tap on the relevant option. If you don’t see “Reset” directly, look under “System” or “About Device.”
Step 3: Confirm the Reset
You’ll see a warning message stating that all data will be erased. This is your last chance to back out. Read the message carefully, then tap “Reset,” “Confirm,” or “OK.” Some models may ask you to enter a PIN or draw a pattern if security is enabled.
Step 4: Wait for the Process to Complete
The watch will restart automatically. You may see a progress bar or the brand logo during this time. Do not turn off the device or remove it from the charger. The process typically takes 1–3 minutes.
Step 5: Set Up as New Device
Once the reset is complete, the watch will boot up as if it’s brand new. You’ll be prompted to select a language, connect to Wi-Fi (if supported), and pair with your smartphone. Follow the on-screen instructions to complete the setup.
Tip: If the watch freezes during setup, wait a few minutes. Sometimes it needs extra time to initialize. If it remains stuck, try a hard restart by holding the power button for 20–30 seconds.
Method 2: Reset Smart Watch U8 Using the Companion App
If your smart watch U8 is still connected to your smartphone, you can perform a reset through the companion app. This method is convenient and often provides additional confirmation steps to prevent accidental resets.
Step 1: Open the Companion App
Launch the app you used to pair your watch—commonly “VeryFit,” “Da Fit,” or “Amazfit” for U8 models. Make sure your phone’s Bluetooth is on and the watch is within range.
Step 2: Connect to Your Watch
On the app’s home screen, tap on your watch’s name or icon to ensure it’s connected. You should see a green dot or “Connected” status. If not, tap “Reconnect” or “Pair Device.”
Step 3: Navigate to Device Settings
Look for a menu icon (usually three lines or dots) in the top corner. Tap it and select “Device Settings,” “My Device,” or “Watch Settings.”
Step 4: Find the Reset Option
Scroll down to find “Reset Device,” “Factory Reset,” or “Restore to Default.” Tap it. The app will display a warning message explaining that all data will be deleted.
Step 5: Confirm the Reset
Tap “Confirm” or “Reset Now.” The app will send a command to the watch. You may see a loading spinner or message like “Resetting…” on both the app and the watch screen.
Step 6: Wait and Reconnect
The watch will restart automatically. Once it powers back on, it will appear as a new device in the app. Follow the pairing process again to reconnect it to your phone.
Note: Some apps require you to be logged into your account to perform a reset. If prompted, enter your login credentials.
Troubleshooting Common Reset Issues
Even with careful preparation, things can go wrong. Here’s how to handle the most common problems when trying to reset your smart watch U8.
The Watch Won’t Respond to Touch
If the screen is frozen or unresponsive, you may not be able to access the settings menu. Try a hard restart first:
- Press and hold the side button for 20–30 seconds until the screen turns off and back on.
- If that doesn’t work, remove the watch from the charger (if connected) and wait 10 seconds before reinserting it.
Once it restarts, try the reset process again.
Reset Option Is Missing or Grayed Out
This can happen if the watch is in a restricted mode or hasn’t synced properly. Try the following:
- Ensure the watch is fully charged.
- Restart both the watch and your smartphone.
- Update the companion app to the latest version.
- Check for a firmware update on the watch (usually under “System” > “About” > “Update”).
App Says “Reset Failed” or “Connection Lost”
This usually means the Bluetooth connection dropped during the process. To fix it:
- Move closer to your phone to strengthen the signal.
- Turn Bluetooth off and on again on both devices.
- Force close the app and reopen it.
- Try the reset directly on the watch instead of using the app.
Watch Restarts but Doesn’t Reset
If the device restarts but still shows your old data, the reset may not have completed. Try the following:
- Repeat the reset process immediately after restarting.
- Ensure you tapped “Confirm” and didn’t accidentally cancel.
- Perform a hard reset by holding both the power button and volume down (if available) for 30 seconds.
Can’t Re-Pair After Reset
If your phone doesn’t detect the watch after a reset:
- Forget the device in your phone’s Bluetooth settings.
- Restart both devices.
- Open the companion app and tap “Add Device” or “Pair New Watch.”
- Make sure the watch is in pairing mode (usually indicated by a blinking icon).
After the Reset: Setting Up Your Smart Watch U8
Once your smart watch U8 has been successfully reset, it’s time to set it up again. This process is similar to the initial setup but gives you a chance to customize everything from scratch.
1. Pair with Your Smartphone
Open the companion app and follow the on-screen instructions to pair your watch. You’ll need to allow permissions for notifications, location, and health data. Make sure Bluetooth is enabled and your phone is nearby.
2. Connect to Wi-Fi (If Supported)
Some U8 models support Wi-Fi for firmware updates and app downloads. Go to “Settings” > “Wi-Fi” and select your network. Enter the password when prompted.
3. Choose a Watch Face
Browse the available watch faces in the app or on the device. You can usually customize colors, complications (like weather or step count), and layout. Tap to apply your favorite.
4. Configure Notifications
Decide which apps can send alerts to your watch. Go to “Notifications” in the app and toggle on messages, calls, emails, or social media apps. You can also set quiet hours or vibration intensity.
5. Set Up Health and Fitness Tracking
Enable features like heart rate monitoring, sleep tracking, and step counting. You may need to enter personal details like age, weight, and height for accurate readings.
6. Test Basic Functions
Make sure everything works: check the time, test the touchscreen, receive a notification, and track a short walk. If anything seems off, restart the watch or re-sync with the app.
Tips for Maintaining Your Smart Watch U8
To avoid needing frequent resets, follow these best practices:
- Update regularly: Install firmware and app updates as soon as they’re available. They often include bug fixes and performance improvements.
- Avoid third-party apps: Stick to apps recommended by the manufacturer to reduce the risk of crashes.
- Clean the watch gently: Wipe the screen and band with a soft, dry cloth. Avoid harsh chemicals.
- Don’t overcharge: Unplug the watch once it reaches 100% to prolong battery life.
- Restart weekly: A simple restart can clear temporary glitches and keep the system running smoothly.
Conclusion: Reset with Confidence
Resetting your smart watch U8 might sound intimidating, but it’s a straightforward process that can solve many common issues. Whether you’re troubleshooting a frozen screen, fixing pairing problems, or preparing to pass your device to someone else, knowing how to reset smart watch U8 gives you greater control over your tech.
Remember to back up your data, charge the device, and follow the steps carefully. Use the on-device method for simplicity or the app-based method for added confirmation. And if you run into trouble, don’t panic—most issues can be resolved with a restart or reconnection.
With your watch restored to factory settings, you’ll enjoy faster performance, fewer errors, and a clean slate for personalization. Now that you’re equipped with this knowledge, you can keep your smart watch U8 running smoothly for months—or even years—to come.