How to Remove Links from Mk Smart Watch

This guide walks you through how to remove links from MK Smart Watch using simple, safe methods. Whether you’re resetting your device or fixing sync issues, we’ve got you covered with clear instructions and expert tips.

Key Takeaways

• Understand what “links” mean on your MK Smart Watch: These are usually Bluetooth or app connections that link your watch to your phone or other devices.
• Removing links improves performance: Clearing old or faulty connections can fix syncing errors, battery drain, and unresponsiveness.
• Use the companion app for easy removal: The official MK Smart Watch app (like Da Fit or Wearfit) lets you manage and delete paired devices quickly.
• Factory reset as a last resort: If other methods fail, a full reset removes all links but also erases personal data—back up first.
• Re-pair carefully after removal: After deleting links, reconnect your watch properly to avoid future issues.
• Keep firmware updated: Updated software often includes fixes for connection bugs and improves overall stability.
• Troubleshoot common problems: If links won’t delete, try restarting devices, checking Bluetooth settings, or reinstalling the app.

Introduction: Why You Might Need to Remove Links from Your MK Smart Watch

If you’ve ever experienced your MK Smart Watch acting up—like not syncing with your phone, draining battery fast, or showing incorrect notifications—you’re not alone. One of the most common causes is outdated or corrupted “links” between your watch and other devices. These links refer to Bluetooth pairings, app connections, or sync settings that tie your smartwatch to your smartphone, fitness apps, or even other wearables.

Over time, these connections can become unstable. Maybe you switched phones, updated your OS, or installed a new version of the companion app. Suddenly, your watch feels sluggish or unresponsive. That’s when knowing how to remove links from MK Smart Watch becomes essential.

In this guide, we’ll walk you through every method—from simple app-based fixes to full factory resets—so you can clean up those digital connections and get your MK Smart Watch running smoothly again. Whether you’re troubleshooting or just doing routine maintenance, these steps are safe, effective, and easy to follow.

By the end, you’ll know exactly how to disconnect unwanted links, reconnect properly, and keep your smartwatch in top shape.

What Are “Links” on an MK Smart Watch?

Before diving into removal steps, it’s important to understand what we mean by “links.” On an MK Smart Watch, links typically refer to:

• Bluetooth Pairings: The wireless connection between your watch and your smartphone. This allows data like steps, heart rate, and notifications to sync.
• App Connections: Links to third-party apps such as Da Fit, Wearfit, Google Fit, or Apple Health. These apps collect and display your health data.
• Device Sync Settings: Preferences that determine how often your watch communicates with your phone or cloud services.
• Notification Permissions: Settings that allow specific apps (like WhatsApp or Instagram) to send alerts to your watch.

When these links become outdated—say, after a phone upgrade or app update—they can cause glitches. Your watch might show old notifications, fail to sync, or even disconnect randomly. Removing and re-establishing these links often solves the problem.

Think of it like unplugging and plugging back in a USB cable. Sometimes, a fresh connection is all you need.

Method 1: Remove Links Using the Companion App

The easiest and safest way to remove links from your MK Smart Watch is through the official companion app. Most MK Smart Watches use apps like Da Fit or Wearfit, which are available on both iOS and Android.

Here’s how to do it step by step:

Step 1: Open the Companion App

Launch the app you use to manage your MK Smart Watch. If you’re unsure which one, check your phone’s app drawer for “Da Fit,” “Wearfit,” or “MK Smart.” These are the most common.

Step 2: Go to Device Settings

Tap on the device icon or your watch’s name at the top of the screen. This usually opens a menu with options like “Device Info,” “Sync,” or “Settings.”

Step 3: Find the “Unpair” or “Remove Device” Option

Look for a button labeled “Unpair,” “Disconnect,” or “Remove Device.” It’s often located under “Advanced Settings” or “Device Management.”

Step 4: Confirm the Action

Tap “Yes” or “Confirm” when prompted. This will delete the link between your phone and watch. Your watch may vibrate or show a message indicating it’s disconnected.

Step 5: Restart Both Devices

Turn off your watch and phone, wait 10 seconds, then turn them back on. This ensures the old connection is fully cleared from memory.

Pro Tip: Reinstall the App If Needed

If the app crashes or won’t let you unpair, uninstall and reinstall it. Sometimes app glitches prevent proper link removal.

This method is ideal for routine maintenance or when switching phones. It’s quick, doesn’t erase your watch data, and keeps everything clean.

Method 2: Remove Links via Phone’s Bluetooth Settings

If the companion app isn’t working, you can remove the link directly from your phone’s Bluetooth menu. This method disconnects the watch at the system level.

Step 1: Open Bluetooth Settings

On iPhone: Go to Settings > Bluetooth.
On Android: Go to Settings > Connected Devices > Bluetooth or swipe down and tap the Bluetooth icon.

Step 2: Find Your MK Smart Watch

Look for your watch’s name in the list of paired devices. It might appear as “MK Watch,” “Smart Band,” or a model number like “MK-360.”

Step 3: Tap the Info or Gear Icon

Next to your watch’s name, tap the “i” (info) icon on iPhone or the gear/settings icon on Android.

Step 4: Select “Forget This Device” or “Unpair”

Confirm the action. This removes the Bluetooth link between your phone and watch.

Step 5: Turn Off Bluetooth on the Watch (Optional)

To ensure a clean break, go to your watch’s settings and turn off Bluetooth. This prevents it from auto-reconnecting.

Important Note: This method only removes the Bluetooth link. If your watch is still connected via the app, you may need to repeat the process in the companion app.

This approach is great when the app is unresponsive or you’re preparing to sell or give away your watch.

Method 3: Factory Reset Your MK Smart Watch

If links won’t delete using the above methods, a factory reset may be necessary. This wipes all data and settings, including all links, returning your watch to its original state.

⚠️ Warning: A factory reset erases everything—step counts, sleep data, custom watch faces, and paired devices. Back up any important data first if possible.

Step 1: Check Your Watch Model

Different MK models have slightly different reset procedures. Common models include MK-360, MK-66, MK-99, and MK-11. Check the back of your watch or the box for the model number.

Step 2: Access the Reset Option

Most MK Smart Watches allow a reset through the settings menu:

• Swipe down from the top of the watch screen to open the quick settings.
• Tap the gear/settings icon.
• Scroll down and look for “System,” “Reset,” or “Restore.”
• Tap “Factory Reset” or “Restore to Default.”

Step 3: Confirm the Reset

You’ll usually see a warning message. Tap “Yes” or “Confirm” to proceed. The watch will restart and show the initial setup screen.

Alternative: Hard Reset (Button Combination)

If the touchscreen isn’t working, try a hard reset:

• Press and hold the side button (and sometimes the bottom button) for 10–15 seconds.
• The watch will vibrate and restart.
• If it doesn’t reset, try holding the button longer or repeat the process.

Step 4: Reconnect Your Watch

After the reset, your watch will act like new. Open the companion app, follow the setup steps, and pair it again.

Pro Tip: Update Firmware After Reset

Once reconnected, check for firmware updates in the app. Updated software often fixes bugs and improves connection stability.

A factory reset is the nuclear option—but sometimes it’s the only way to fully remove stubborn links.

Method 4: Remove App-Based Links (Da Fit, Wearfit, etc.)

Sometimes, the issue isn’t Bluetooth—it’s the app connection itself. If your watch syncs but shows wrong data or won’t update, try removing links within the app.

Step 1: Open the Companion App

Launch Da Fit, Wearfit, or whichever app you use.

Step 2: Go to Account or Profile Settings

Tap the profile icon (usually in the top-right corner).

Step 3: Find “Connected Devices” or “My Devices”

Look for a list of devices linked to your account.

Step 4: Remove the MK Smart Watch

Tap on your watch and select “Remove” or “Delete.” Confirm the action.

Step 5: Log Out and Back In (Optional)

For a deeper clean, log out of your app account, close the app, then log back in. This refreshes all connections.

Step 6: Reconnect the Watch

Follow the app’s pairing instructions to link your watch again.

This method is especially useful if you use multiple devices or have synced your watch to a cloud account.

Method 5: Clear Cache and Data on Your Phone

Sometimes, the problem lies in your phone’s cached data. Over time, the companion app can store corrupted files that prevent proper link removal.

Step 1: Go to Phone Settings

On Android: Settings > Apps > [App Name] > Storage
On iPhone: You can’t clear app cache directly, but you can offload the app (Settings > General > iPhone Storage > [App] > Offload App).

Step 2: Clear Cache (Android)

Tap “Clear Cache.” This removes temporary files without deleting your data.

Step 3: Clear Data (Android – Use with Caution)

Tap “Clear Data” or “Clear Storage.” This resets the app to its default state—you’ll lose app settings and login info.

Step 4: Reopen the App

Launch the app and log in again. Try removing the watch link now.

For iPhone Users:

Offload the app, then reinstall it from the App Store. This clears all data and gives you a fresh start.

Clearing cache is a simple fix that often resolves sync and connection issues.

How to Reconnect Your MK Smart Watch After Removing Links

Once you’ve removed the links, you’ll need to reconnect your watch properly. Here’s how:

Step 1: Ensure Bluetooth is On

Turn on Bluetooth on both your phone and watch.

Step 2: Open the Companion App

Launch Da Fit, Wearfit, or your preferred app.

Step 3: Put Your Watch in Pairing Mode

On most MK watches, swipe down and tap the Bluetooth icon, or go to Settings > Bluetooth > Search.

Step 4: Follow the On-Screen Instructions

The app will search for nearby devices. Select your watch when it appears.

Step 5: Confirm Pairing

You may see a code on both devices. Make sure they match and tap “Pair.”

Step 6: Sync Data

Allow the app to sync your health data. This may take a few minutes.

Pro Tip: Enable Auto-Sync

In the app settings, turn on “Auto Sync” so your watch updates regularly without manual input.

Reconnecting properly ensures a stable, long-lasting link.

Troubleshooting Common Issues When Removing Links

Even with the right steps, you might run into problems. Here’s how to fix the most common ones:

Issue 1: Watch Won’t Unpair from the App

• Solution: Force close the app, restart your phone, and try again. If that fails, use the Bluetooth method or factory reset.

Issue 2: Watch Reconnects Automatically

• Solution: Turn off Bluetooth on your phone before removing the link. Or disable “Auto Connect” in the watch settings.

Issue 3: App Crashes When Trying to Remove Device

• Solution: Update the app from the App Store or Google Play. If it still crashes, reinstall it.

Issue 4: Factory Reset Doesn’t Work

• Solution: Try the hard reset method (button hold). If the watch is unresponsive, charge it for 30 minutes first—low battery can prevent resets.

Issue 5: Watch Shows “Connection Failed” After Reconnecting

• Solution: Make sure your phone’s Bluetooth is working with other devices. Also, check for app or firmware updates.

Issue 6: Data Doesn’t Sync After Reconnection

• Solution: Go to the app settings and manually trigger a sync. Also, ensure background app refresh is enabled for the companion app.

Most issues are fixable with patience and the right steps.

Preventing Future Link Problems

Once you’ve removed and reconnected your links, take these steps to avoid future issues:

• Update Regularly: Keep your watch firmware and companion app updated. Updates often include bug fixes for connection problems.
• Avoid Multiple Pairings: Don’t pair your watch with more than one phone at a time unless necessary.
• Restart Weekly: Restart your watch and phone once a week to clear temporary glitches.
• Use Official Apps: Stick to Da Fit or Wearfit—avoid third-party apps that may cause conflicts.
• Monitor Battery: Low battery can disrupt Bluetooth. Charge your watch regularly.
• Check Permissions: Ensure the companion app has access to Bluetooth, location, and notifications.

Prevention is easier than repair. A little maintenance goes a long way.

Conclusion: Keep Your MK Smart Watch Running Smoothly

Knowing how to remove links from MK Smart Watch is a valuable skill that can save you time, frustration, and even money. Whether you’re fixing a sync issue, switching phones, or just doing routine cleanup, the methods in this guide give you full control over your device’s connections.

Start with the companion app or Bluetooth settings for quick fixes. If those don’t work, try clearing app data or performing a factory reset. And always reconnect carefully to ensure a stable link.

Remember, smartwatches are meant to make life easier—not harder. By keeping your links clean and your software updated, you’ll enjoy accurate tracking, smooth notifications, and long battery life.

If you run into trouble, don’t panic. Most issues are fixable with patience and the right steps. And now, you have the knowledge to handle them like a pro.

So go ahead—give your MK Smart Watch a fresh start. Your future self will thank you.