How to Connect Willful Smart Watch

This guide walks you through how to connect Willful smart watch to your smartphone quickly and easily. You’ll learn pairing steps, app setup, and how to fix common connection issues.

Key Takeaways

Charge your watch first: Always ensure your Willful smart watch has at least 50% battery before pairing to avoid interruptions.
Download the right app: Use the official “VeryFit” or “Da Fit” app (depending on your model) from the App Store or Google Play.
Enable Bluetooth and location: Both must be turned on for successful pairing—location helps with device discovery.
Follow on-screen prompts: The app guides you through each step, including syncing health data and setting notifications.
Restart if needed: If pairing fails, restart both your phone and watch, then retry the process.
Keep devices close: Stay within 3 feet during setup to maintain a strong Bluetooth signal.
Update firmware regularly: Check for app and watch updates to ensure compatibility and new features.

How to Connect Willful Smart Watch: A Complete Step-by-Step Guide

So, you’ve just unboxed your brand-new Willful smart watch—congratulations! These sleek, affordable wearables pack a punch with fitness tracking, heart rate monitoring, sleep analysis, and smartphone notifications. But before you can start tracking your steps or receiving texts on your wrist, you need to connect your Willful smart watch to your phone.

Don’t worry—it’s easier than it sounds. In this comprehensive guide, we’ll walk you through every step of the process, from charging your device to syncing data and troubleshooting common issues. Whether you’re using an iPhone or Android, this guide covers everything you need to know to get your Willful smart watch up and running in under 10 minutes.

By the end of this article, you’ll be able to:
– Charge and prepare your Willful smart watch
– Download and set up the correct companion app
– Pair your watch with your smartphone via Bluetooth
– Customize settings like notifications and watch faces
– Troubleshoot connection problems like a pro

Let’s get started!

Step 1: Charge Your Willful Smart Watch

Before you even think about connecting your Willful smart watch, make sure it’s fully charged. A dead or low battery can cause pairing failures or interrupt the setup process.

Why Charging First Matters

Smart watches, especially budget-friendly models like Willful, often ship with minimal battery. Attempting to pair a nearly dead device can lead to timeouts, failed connections, or incomplete firmware checks. Charging ensures your watch has enough power to complete the Bluetooth handshake and sync data properly.

Visual guide about How to Connect Willful Smart Watch

Image source: watchranker.com

How to Charge Your Willful Watch

Most Willful smart watches come with a magnetic charging cable. Here’s how to use it:

Locate the charging port on the back of your watch—it’s usually a small metal pad or two.
Attach the magnetic end of the charging cable to the back of the watch. It should snap into place securely.
Plug the USB end into a wall adapter, computer, or power bank.
Wait until the screen shows a charging icon or battery percentage. Aim for at least 50–100% before proceeding.

Pro Tip: While charging, avoid using the watch. Let it rest so it can charge efficiently and avoid overheating.

Step 2: Download the Companion App

Willful smart watches don’t connect directly to your phone’s settings like Apple Watch or Wear OS devices. Instead, they use a third-party app to manage pairing, data sync, and customization.

Which App Should You Use?

The app you need depends on your specific Willful model. Most Willful watches use one of two apps:

VeryFit – Common for models like Willful SW07, SW08, and SW09.
Da Fit – Used by newer models such as Willful SW10 and SW11.

To confirm which app your watch uses, check the user manual or the box. You can also look at the watch’s startup screen—it often displays the app name.

How to Download the App

Follow these steps to get the right app on your phone:

Open the App Store (iPhone) or Google Play Store (Android).
Search for “VeryFit” or “Da Fit” (depending on your model).
Download the official app by the developer “VeryFitPro” or “Da Fit.”
Wait for the installation to complete.

Important: Avoid downloading third-party or fake apps. Stick to the official versions to prevent security risks or compatibility issues.

Grant App Permissions

Once installed, open the app. It will ask for several permissions—grant them to ensure full functionality:

Bluetooth: Required for pairing.
Location: Needed for device discovery (even if you’re not using GPS).
Notifications: So the app can forward alerts to your watch.
Storage: To save health data and firmware updates.

On Android, you may also need to allow “Background Activity” or “Auto-start” for the app to work reliably.

Step 3: Enable Bluetooth and Location on Your Phone

Bluetooth is the bridge between your phone and your Willful smart watch. Without it, pairing is impossible. Location services are also required—even if you’re not using GPS—because Android and iOS use location data to scan for nearby Bluetooth devices.

How to Turn On Bluetooth

Here’s how to enable Bluetooth on both iPhone and Android:

On iPhone:

Open Settings.
Tap Bluetooth.
Toggle the switch to On (green).

On Android:

Swipe down from the top of the screen to open the quick settings panel.
Tap the Bluetooth icon to turn it on.
Alternatively, go to Settings > Connected devices > Connection preferences > Bluetooth and toggle it on.

How to Enable Location Services

Location must be enabled for the app to detect your watch during scanning.

On iPhone:

Go to Settings > Privacy & Security > Location Services.
Turn on Location Services.
Scroll down and find your app (VeryFit or Da Fit).
Set it to While Using the App or Always.

On Android:

Go to Settings > Location.
Toggle Use location to On.
Under App permissions, ensure your app has access.

Note: Some Android phones (like Xiaomi or Huawei) have aggressive battery-saving features that block apps from running in the background. You may need to manually allow the app to run unrestricted.

Step 4: Pair Your Willful Smart Watch

Now that your watch is charged, the app is installed, and your phone settings are ready, it’s time to pair the devices.

Open the App and Start Pairing

Follow these steps:

Open the VeryFit or Da Fit app on your phone.
Tap Start or Scan (the exact wording may vary).
The app will begin scanning for nearby Bluetooth devices.
Wait a few seconds—your Willful watch should appear in the list (e.g., “Willful SW08” or “Da Fit Band”).
Tap on your watch’s name to begin pairing.

Confirm Pairing on the Watch

Once you tap your watch in the app, a prompt may appear on the watch screen asking you to confirm the connection. Here’s what to do:

Look at your watch screen. You should see a message like “Pair?” or “Connect?”
Tap Yes or Accept on the watch.
If no prompt appears, the connection may still proceed automatically.

Tip: Keep your phone and watch within 3 feet of each other during this process. Walls, metal objects, or other electronics can interfere with the Bluetooth signal.

Wait for Sync to Complete

After pairing, the app will begin syncing data. This may take 30 seconds to a few minutes. You’ll see a progress bar or spinning icon. During this time:

Do not close the app.
Do not turn off Bluetooth.
Stay near your phone.

Once syncing is complete, you’ll see a success message like “Connected” or “Sync Complete.”

Step 5: Customize Your Willful Smart Watch

Congratulations! Your Willful smart watch is now connected. But the fun doesn’t stop there. You can personalize your watch to suit your lifestyle.

Set Up Notifications

Want to see texts, calls, and app alerts on your wrist? Here’s how:

In the app, go to Device or My Watch.
Tap Notifications or Message Reminder.
Toggle on the apps you want to receive alerts from (e.g., WhatsApp, Messenger, Phone).
Some apps allow you to customize vibration patterns or delay settings.

Note: Not all apps are supported. Stick to major ones like SMS, calls, and popular messaging platforms.

Change the Watch Face

Most Willful watches let you switch between digital and analog faces. To change it:

In the app, go to Watch Face or Style.
Browse available designs.
Tap one you like and select Sync or Apply.
The watch will update within a few seconds.

Some models even support custom photos—upload a picture from your gallery and set it as your background.

Adjust Health and Fitness Settings

Customize how your watch tracks your activity:

Set your gender, age, height, and weight for accurate calorie and distance calculations.
Enable heart rate monitoring (continuous or periodic).
Turn on sleep tracking to analyze your rest patterns.
Set step goals and reminders to move.

These settings help the watch provide more personalized insights and alerts.

Enable Do Not Disturb and Other Modes

To avoid interruptions during meetings or sleep:

Go to Settings in the app.
Turn on Do Not Disturb and set a schedule (e.g., 10 PM to 7 AM).
Enable Theater Mode to dim the screen and silence alerts.
Use Water Mode before swimming to prevent accidental touches.

Step 6: Sync Data and Monitor Performance

Your Willful smart watch automatically syncs data with the app whenever it’s in range. But you can also manually sync to ensure everything is up to date.

How to Manually Sync

To force a sync:

Open the app.

Pull down on the home screen (like refreshing a webpage).

Or tap the Sync button (usually a circular arrow icon).

You’ll see your latest step count, heart rate, sleep data, and more update in real time.

View Your Health Stats

The app organizes your data into easy-to-read charts:

Steps: Daily, weekly, and monthly breakdowns.

Heart Rate: Graphs showing resting and active rates.

Sleep: Duration, deep vs. light sleep, and wake times.

Calories: Estimated based on activity and BMR.

Workouts: Log runs, walks, or gym sessions.

Use these insights to track progress and stay motivated.

Troubleshooting Common Connection Issues

Even with perfect setup, sometimes things go wrong. Here’s how to fix the most common problems when connecting your Willful smart watch.

Watch Not Showing Up in App

If your watch doesn’t appear during scanning:

Make sure Bluetooth and location are on.

Restart both your phone and watch.

Move closer to your phone (within 3 feet).

Check if the watch is in pairing mode (some models require you to long-press a button).

Try forgetting the device in your phone’s Bluetooth settings and re-pairing.

Pairing Fails or Times Out

If the connection keeps failing:

Ensure the watch has at least 30% battery.

Close other Bluetooth apps or devices that might interfere.

Clear the app’s cache (Android: Settings > Apps > VeryFit > Storage > Clear Cache).

Reinstall the app and try again.

Notifications Not Working

If you’re not getting alerts:

Check that notifications are enabled in the app.

Ensure the app has notification access in your phone’s settings.

On Android, disable battery optimization for the app.

Test with a phone call or SMS to confirm.

Watch Disconnects Frequently

If your watch keeps losing connection:

Keep the app running in the background.

Avoid putting your phone in airplane mode or low-power mode.

Update the app and watch firmware (if available).

Reset the watch to factory settings as a last resort.

How to Reset Your Willful Smart Watch

If all else fails, a reset can solve stubborn issues:

Go to the watch’s settings menu.

Find System or Reset.

Tap Factory Reset or Restore.

Confirm and wait for the watch to restart.

Re-pair using the steps above.

Warning: Resetting erases all data on the watch. Sync first if possible.

Maintaining Your Willful Smart Watch

To keep your watch running smoothly, follow these best practices:

Update Firmware Regularly

Manufacturers release updates to fix bugs and add features. To check for updates:

Open the app.

Go to Device or Settings.

Look for Firmware Update or System Update.

If an update is available, follow the prompts to install it.

Updates usually take 5–10 minutes and require a stable connection.

Clean Your Watch

Dirt and sweat can affect sensors and comfort:

Wipe the band and screen with a soft, damp cloth.

Avoid harsh chemicals or submerging the watch unless it’s water-resistant.

Remove the watch before applying lotion or perfume.

Charge Properly

To extend battery life:

Avoid letting the battery drop to 0% regularly.

Unplug once fully charged.

Use the original charger when possible.

Conclusion

Connecting your Willful smart watch is a simple process—once you know the steps. By charging your device, downloading the correct app, enabling Bluetooth and location, and following the pairing prompts, you’ll have your watch synced and ready to use in minutes.

Remember to customize settings like notifications, watch faces, and health tracking to get the most out of your device. And if you run into issues, the troubleshooting tips in this guide will help you resolve them quickly.

Your Willful smart watch is more than just a timepiece—it’s a fitness companion, a notification hub, and a stylish accessory all in one. Now that you know how to connect Willful smart watch, you’re ready to enjoy all its features and stay connected on the go.

Happy tracking!