How to Connect Fitpro Smart Watch to Iphone

How to Connect Fitpro Smart Watch to Iphone

by

Connecting your Fitpro smart watch to an iPhone is easier than you think. This guide walks you through every step—from downloading the app to syncing your data—so you can start tracking your health and staying connected right away.

Key Takeaways

  • Download the correct app: Use the official Fitpro app (or compatible third-party app like “VeryFitPro”) from the App Store to ensure compatibility and full functionality.
  • Enable Bluetooth on your iPhone: Your iPhone must have Bluetooth turned on for the smart watch to pair and communicate with your device.
  • Charge your Fitpro watch before setup: A low battery can interrupt the pairing process, so make sure your watch has at least 50% charge.
  • Follow the on-screen pairing instructions carefully: The app will guide you through scanning, confirming codes, and syncing data—don’t skip any steps.
  • Grant necessary permissions: Allow access to notifications, health data, location, and Bluetooth for optimal performance.
  • Keep your iPhone and watch close during setup: Maintain a distance of less than 3 feet to ensure a strong Bluetooth connection.
  • Update firmware if needed: After connecting, check for firmware updates in the app to improve performance and fix bugs.

Introduction: Why Connect Your Fitpro Smart Watch to iPhone?

So, you’ve just unboxed your brand-new Fitpro smart watch—congratulations! These sleek, feature-packed devices are designed to help you monitor your health, track workouts, manage notifications, and stay connected throughout the day. But to unlock their full potential, you need to connect them to your iPhone. Whether you’re a fitness enthusiast, a busy professional, or someone who just loves smart tech, syncing your Fitpro watch with your iPhone opens up a world of convenience and insight.

In this comprehensive guide, we’ll walk you through the entire process of connecting your Fitpro smart watch to your iPhone—step by step. You’ll learn how to download the right app, pair your devices via Bluetooth, sync your health data, customize notifications, and troubleshoot common issues. By the end, you’ll be confidently using your Fitpro watch to track steps, monitor heart rate, receive calls and messages, and even control your music—all from your wrist.

Don’t worry if you’re not tech-savvy. We’ve broken everything down into simple, easy-to-follow instructions. No jargon, no confusion—just clear, practical advice that works. Let’s get started!

What You’ll Need Before You Begin

Before diving into the setup process, make sure you have the following ready:

How to Connect Fitpro Smart Watch to Iphone

Visual guide about How to Connect Fitpro Smart Watch to Iphone

Image source: image.winudf.com

  • A fully charged Fitpro smart watch: Low battery can cause pairing failures, so charge it to at least 50% before starting.
  • An iPhone running iOS 10 or later: Most Fitpro models require at least iOS 10, but newer versions (iOS 13+) offer better compatibility.
  • Stable Wi-Fi or cellular connection: Needed for downloading the app and syncing data.
  • Bluetooth enabled on your iPhone: This is essential for communication between your phone and watch.
  • The correct companion app: Most Fitpro watches use the “VeryFitPro” app, available for free on the App Store.
  • Your Apple ID logged in: Required for downloading apps and syncing with Health app.

Having these items ready will save you time and prevent frustration during setup. Once you’ve checked everything off the list, you’re ready to begin!

Step 1: Download the Fitpro Companion App

The first step in connecting your Fitpro smart watch to your iPhone is downloading the official companion app. While Fitpro doesn’t always have its own branded app, most of their models are compatible with the widely used VeryFitPro app. This app is trusted by millions and supports a wide range of smartwatches, including Fitpro.

How to Download VeryFitPro

  1. Open the App Store on your iPhone.
  2. Tap the Search tab at the bottom.
  3. Type “VeryFitPro” into the search bar and tap Search.
  4. Look for the app with the blue icon and the developer name “VeryFitPro” or “VeryFit”.
  5. Tap Get (or the cloud icon if you’ve downloaded it before), then authenticate with Face ID, Touch ID, or your Apple ID password.
  6. Wait for the app to download and install—this usually takes less than a minute.

Pro Tip: Avoid downloading third-party or unofficial apps that claim to support Fitpro. These may contain malware or lack proper functionality. Stick to VeryFitPro for the best experience.

Why VeryFitPro?

VeryFitPro is more than just a pairing tool—it’s your central hub for managing your Fitpro watch. Through this app, you can:

  • Sync health data (steps, heart rate, sleep)
  • Customize watch faces
  • Set alarms and reminders
  • Control music playback
  • Receive notifications from your iPhone
  • Update firmware

Once installed, open the app and create an account if prompted. You’ll need to provide basic info like your age, height, weight, and gender to personalize your health tracking.

Step 2: Charge and Power On Your Fitpro Watch

Before pairing, ensure your Fitpro smart watch is charged and powered on. A dead or low battery is one of the most common reasons for pairing failures.

How to Charge Your Fitpro Watch

  1. Locate the charging cable that came with your watch. It’s usually a magnetic USB charger.
  2. Attach the magnetic end to the back of the watch—it should snap into place.
  3. Plug the USB end into a wall adapter or your computer.
  4. Wait until the battery icon shows at least 50% charge. A full charge is ideal but not always necessary for setup.

Powering On the Watch

  1. Press and hold the side button (or the main button on the watch face) for 3–5 seconds.
  2. The Fitpro logo should appear, followed by the main watch face.
  3. If the screen remains black, try charging it longer or resetting it (see troubleshooting section).

Note: Some Fitpro models automatically enter pairing mode when turned on for the first time. If you see a Bluetooth icon or “Pairing” message, that’s a good sign!

Step 3: Enable Bluetooth on Your iPhone

Bluetooth is the wireless technology that allows your iPhone and Fitpro watch to communicate. Without it enabled, pairing is impossible.

How to Turn On Bluetooth

  1. Open the Settings app on your iPhone.
  2. Tap Bluetooth.
  3. Toggle the switch to On (it should turn green).
  4. Ensure your iPhone is discoverable—this happens automatically when Bluetooth is on.

Pro Tip: Keep your iPhone and watch within 3 feet of each other during pairing. Walls, metal objects, or other electronics can interfere with the Bluetooth signal.

Check Bluetooth Status

You can also check Bluetooth status from the Control Center:

  1. Swipe down from the top-right corner of your screen (or up from the bottom on older iPhones).
  2. Look for the Bluetooth icon. If it’s blue, Bluetooth is on. If gray, tap it to enable.

Once Bluetooth is active, your iPhone will begin scanning for nearby devices—including your Fitpro watch.

Step 4: Pair Your Fitpro Watch with Your iPhone

Now comes the exciting part: pairing your devices. This process syncs your Fitpro watch with your iPhone so they can share data and notifications.

Open the VeryFitPro App

  1. Launch the VeryFitPro app on your iPhone.
  2. If it’s your first time, follow the on-screen prompts to set up your profile (age, weight, etc.).
  3. Tap Add Device or Scan for Device (the exact wording may vary).

Scan for Your Watch

  1. The app will begin scanning for nearby Bluetooth devices.
  2. Look for your Fitpro watch in the list—it may appear as “Fitpro,” “VeryFit,” or a model number like “FP-100.”
  3. Tap on your watch when it appears.

Confirm the Pairing Code

  1. A 6-digit code will appear on both your iPhone and watch screen.
  2. Verify that the codes match exactly.
  3. Tap Confirm or Pair on both devices.

Important: If the codes don’t match, cancel the process and try again. Never pair if the codes differ—this could connect you to the wrong device.

Wait for Syncing to Complete

Once paired, the app will begin syncing data. This may take 1–3 minutes. You’ll see a progress bar or spinning icon. During this time:

  • Do not close the app.
  • Keep your iPhone and watch close together.
  • Do not restart either device.

When syncing is complete, you’ll see a success message like “Device Connected” or “Sync Complete.”

Step 5: Grant Necessary Permissions

To get the most out of your Fitpro watch, you’ll need to allow the VeryFitPro app access to certain features on your iPhone. These permissions enable notifications, health tracking, and more.

Notification Access

  1. Go to Settings > Notifications.
  2. Find VeryFitPro in the list and tap it.
  3. Enable Allow Notifications.
  4. Choose your preferred alert style (Banners, Alerts, or None).
  5. Enable options like Show on Lock Screen and Badge App Icon.

This allows your watch to display calls, texts, emails, and app alerts.

Health App Integration

  1. Open the Health app on your iPhone.
  2. Tap Sources at the bottom.
  3. Find VeryFitPro and tap it.
  4. Toggle on data types you want to sync (Steps, Heart Rate, Sleep, etc.).

This lets your Fitpro watch contribute data to Apple Health, giving you a complete picture of your wellness.

Location and Bluetooth Permissions

  1. Go to Settings > Privacy & Security > Location Services.
  2. Find VeryFitPro and set it to While Using the App or Always.
  3. Ensure Bluetooth is enabled (as covered earlier).

Location access helps with GPS tracking during outdoor workouts.

Step 6: Customize Your Fitpro Watch

Now that your devices are connected, it’s time to personalize your Fitpro watch. The VeryFitPro app offers a variety of customization options.

Change the Watch Face

  1. Open the VeryFitPro app.
  2. Tap Watch Face or Customize.
  3. Browse available designs (digital, analog, fitness-themed, etc.).
  4. Tap a design to preview it, then tap Sync to apply it to your watch.

Some models support custom photos—upload your favorite image for a personal touch!

Set Up Notifications

  1. In the app, go to Notification Settings.
  2. Toggle on apps you want to receive alerts from (Messages, WhatsApp, Instagram, etc.).
  3. Adjust vibration strength and alert frequency.

You can also mute notifications during sleep hours using the Do Not Disturb feature.

Configure Health Goals

  1. Tap Health Goals in the app.
  2. Set daily step targets, calorie goals, and sleep schedules.
  3. Enable reminders to move every hour.

Your watch will vibrate and notify you when you reach milestones.

Troubleshooting Common Connection Issues

Even with careful setup, you might run into problems. Here’s how to fix the most common issues when connecting your Fitpro smart watch to iPhone.

Watch Not Showing Up in App

  • Solution: Make sure Bluetooth is on, the watch is charged, and both devices are close. Restart the app and try scanning again.

Pairing Code Doesn’t Match

  • Solution: Cancel the pairing, restart both devices, and try again. Never force a connection with mismatched codes.

App Crashes or Freezes

  • Solution: Close the app completely (swipe up from the app switcher), then reopen it. Update the app if needed.

Notifications Not Syncing

  • Solution: Check notification permissions in iPhone Settings. Ensure the app is allowed to send alerts.

Watch Disconnects Frequently

  • Solution: Keep devices within range. Avoid placing them near microwaves, routers, or metal objects that block signals.

Firmware Update Failed

  • Solution: Ensure strong Wi-Fi, full battery, and stable connection. Try updating again later.

If problems persist, contact Fitpro customer support or check the app’s help section.

Tips for Maintaining a Strong Connection

Once connected, follow these tips to keep your Fitpro watch and iPhone working smoothly together:

  • Update the app regularly: New versions fix bugs and add features.
  • Restart your watch weekly: This clears memory and improves performance.
  • Avoid extreme temperatures: Heat and cold can affect battery and Bluetooth.
  • Keep the watch clean: Wipe the sensors to ensure accurate heart rate and sleep tracking.
  • Use original chargers: Cheap cables can damage the battery over time.

Conclusion: Enjoy Your Connected Fitpro Experience

Congratulations! You’ve successfully connected your Fitpro smart watch to your iPhone. From now on, you’ll enjoy real-time health tracking, instant notifications, and seamless control—all from your wrist. Whether you’re hitting the gym, walking the dog, or catching up on emails, your Fitpro watch is now a powerful extension of your iPhone.

Remember, the key to a great experience is keeping both devices charged, updated, and close during syncing. With the VeryFitPro app, you have full control over your watch’s features, so explore the settings and make it truly yours.

If you ever run into issues, refer back to this guide or reach out to support. Your Fitpro watch is designed to make life easier, healthier, and more connected—so enjoy every step of the journey!